Ivoclar Vivadent Programat CS4

Programat CS4 – furnace for zirconium oxide sintering, glazing, and crystallizationProgramat CS4 furnace is ideal for sintering, crystallizing, and glazing restorations in the dental office. Programat CS4 is a multi-purpose COMBO furnace for dental practice, suitable for crystallizing IPS e.max CAD and sintering of IPS e.max ZirCAD (Zirconia).The speed sintering program allows zirconia restorations to be manufactured directly in the dental practice in a single session. A arranged membrane-sealed keypad with a graphic display enables easy operation. Both pre-set and individual programs for third-party materials are available. Programat CS4 is a stand-alone furnace that features an open system. Advantages:Fast sintering of IPS e.max ZirCADCrystallization of IPS e.max CADGlaze program for IPS e.max ZirCAD, IPS e.max CAD, and IPS Empress CADHigh processing capacity (up to six units)Open systemSimple and language-independent operation due to the proven combination of the membrane-sealed keypad and graphic displayPower Saving TechnologyCompact designPossibility of on-site temperature calibrationOSD (Optical Status Display)Remote control via PC/laptop using PrograBase3 softwareKey featuresThe firing chamber can be heated up to 1600 ° C;The electronics with the corresponding software controls the sintering program;There is a constant comparison between the actual and the set temperature;The sintering table can accommodate up to 6 single restorations at the same timeFeatures of the modelFast sintering process (it is possible to manufacture ZrO2 restorations in one medical appointment, maximum – six units at a time);Glaze firing and crystallization (cost-saving, as usually different furnaces, are required for sintering, glaze firing, and crystallization);Precise temperature (precise temperature control for glaze firing, crystallization, and sintering).ApplicationSintering and glazing of ZrO 2 materials (eg IPS e.max ZirCAD);Crystallization and glazing (e.g. IPS e.max CAD).The Programat CS4 cannot be used as a ceramic kiln for ceramics in the dental laboratory.SpecificationsPower supply: 118-240 V / 50-60 HzOvervoltage category: IIPollution degree: 2Allowable voltage fluctuations: – 10%Maximum current consumption: 16A @ 118V, 8A @ 240VElectrical fuses: 250 V / T 16 A (heating element)Fuse size: diameter 5 x 20 mmClosed oven dimensions: depth – 430 mm, width – 310 mm (with stand – 390 mm), height – 570 mmUseful chamber volume: diameter – 80 mm, height – 80 mmMaximum firing temperature: 1600 ° CWeight: bottom 10 kg, furnace head 17 kgEquipmentThe lower part of the oven is electronically controlled;Furnace head with sintering chamber;Sintering table;Object stand;Network cable;Table fork;Cleaning brush;Crystallization table.Delivery formsProgramat CS4Power cordSintering Furnace Temperature Checking Set Starter Kit – Operating InstructionsSinter traySinter tray forkIPS e.max Speed Crystallization TrayUSB download cablevar. accessoriesInstructions for UseWarranty CardReference LibraryIvoclar Vivadent Programat CS4 Manufacturer InformationIvoclar Vivadent Programat CS4 Instruction for Use